User`s manual

13 Chapter 2 System Setup
The rear section of B/P version includes B/P rear window, 20-slot I/O
brackets and the sheet metal kit for 1+1 or N+1 redundant power supply.
The rear section of M/B version includes M/B rear window, 7-slot I/O
brackets, ATX M/B I/O cover and sheet metal kit for single or 1+1 redun-
dant power.
2.1.4 Drive Bay & SCSI Storage Installation
The Standard Drive Bay of the ACP-7000 can hold a slim type CD-ROM,
5.25"(x2) and 3.5" (x1) devices Installation disk drives
a. Remove the top cover
b. Release two thumbscrews to draw out the backplane holder until
you have enough space to take out driver bay. See Figure 2.5
c. Undo the four screws of cushion.
d. Lift off the Standard Drive Bay. See Figure 2.6
e. Insert the drives into their proper locations in the drive bay and
secure them with the screws provided.
f. Connect the disk drive power and signal cables.
Figure 2.5: Backplane Holder