User manual

ACP-2010MB User Manual 28
4.3 Switch Settings
4.3.1 Fan Number Setting
Table 4.11: SW2, Fan number setting
Fan Number SW 1-1 SW 1-2 SW 1-3 SW 1-4
0 OFF OFF OFF OFF
1ONOFFOFFOFF
2 (default) OFF ON OFF OFF
3ONONOFFOFF
4 OFF OFF ON OFF
5 ON OFF ON OFF
6 OFF ON ON OFF
7 ONONONOFF
Note: Connect the fan connectors in the correct
sequence: if two fans are set on SW1, the
correct method is to connect them into con-
nectors FAN1 and FAN2. If the two fans
are connected to other fan connectors,out
of sequence, such as FAN1 and FAN3 or
FAN2 and FAN3 or FAN3 and FAN4,
instead of FAN1 and FAN2, then the alarm
will not function correctly.