User manual

ACP-2010MB User Manual 20
3.4 Cleaning the Filters
The filter functions to block dust or particles from the work environment
and greatly helps to extend the longevity of the system. It's better to
check, clean and replace the filters periodically. Two reusable, washable
filters are located behind the front door and in front of the system fans.
To remove and clean the filter, proceed as follows:
1. Open the front door.
2. Loosen the two screws on the filter bracket. Then pull out the filter
to clean it, or replace it with a fresh one.
3. To pull out the fan filter, push the hook and slide it rightwards. (see
Figure 3.6) Clean the filter with a soft brush or wash the dust away
from the filter with fluent water and let it dry thoroughly.
4. Replace them inside the unit.
Figure 3.6: Replacing the filters