User manual

ACP-2010MB User Manual 16
Chapter 3 Operation
3.1 The Front Panel
The front panel features the lockable door and four LED indicators. It
provides front accessible, dual USB ports and a PS/2 connector. The front
door can be closed with or without the key using the user-friendly rotary
lock. Behind the opening door is a Momentary Power switch, a System
Reset button, and an Alarm Reset button. Specific functions are described
as below.
Figure 3.1: Front panel with door closed
Figure 3.2: Front panel with door open
3.1.1 Switch, Button and I/O Interfaces
Momentary Power switch: Press this switch to turn the system power on
or off. Please use the system shutdown or press this switch for few sec-
onds to turn off the system ATX power.
Alarm Reset button: Whenever a fault occurs in the system (e.g., fan
failure or chassis overheating) the audible alarm will be activated. Press-
ing this button will stop the alarm from beeping.
System Reset button: Press this button to reboot the system.
Dual USB port: For connecting a wide range of USB devices for data
transfer, backup or input.
PS/2 connector: For connecting a keyboard or mouse depending on the
motherboard design.
FAN
TEMP
HDD
POWER
FAN
TEMP
HDD
POWER
POWER
HDD
TEMP
FAN
POWER
HDD
TEMP
FAN