User manual

13 Chapter 2
4. To install the optical disk drive and 3.5" FDD, undo the screws on
the 5.25" disk drive bracket.
5. Undo the screws on each side of the 5.25" disk drive bracket to
remove the front covers.
6. Slide the optical disk drive and the FDD into the bracket and fasten
it on both sides with the eight screws provided. (see Figure 2.9)
Return the 5.25" disk drive bracket with the disk drives in the orig-
inal position and reattach it inside the chassis with the original
screws.
7. Connect the suitable IDE or SATA cables from the motherboard to
the 3.5" internal HDD, the optical disk drive, or an FDD. Then,
plug the power connector into each disk drive.
Figure 2.8: Installing the optical disk drive and 3.5" FDD