User manual

ACP-2010MB User Manual 10
2. Users can find the stand-off bracket (see Figure 2.3) in the acces-
sory box. Be sure to follow the instruction and fasten the mother-
board onto the chassis with the stand-off bracket locations.
3. Attach the motherboard I/O shielding onto the rear plate first. Then
fasten the motherboard onto the chassis. (see Figure 2.4)
4. Connect the 20-pin (or 24-pin) ATX power connector and the 4-pin
+12V power connector from the power supply to the motherboard
5. Connect the 9-pin USB wire, PS/2 wire, Power switch wire, and the
System Reset switch wire from the chassis to the motherboard.
Figure 2.3: Stand-off bracket
Figure 2.4: Installing a motherboard