Specifications

6
SETUP
AUTOMIXER SETTINGS SCREEN
The Automixer Settings screen is used to adjust automatic mixing functions, which affect the entire mixer. It is accessed via the Configure
VRAM menu, or from the Mix screen. Channel Off Attenuation
selects the amount of attenuation applied to ‘auto’ channels when they are
inactive (gated off). NOTE: Channel Off Attenuation is set separately for Main Out & Aux Out. Gate Hold Time
selects the length of time
that ‘auto’ channels will remain active (gated on) once signal is no longer present. Max Number of Open Mics
limits the quantity of ‘auto’
channels which can be active (gated on) to Main Out at the same time. Designated Mic On / Last Mic Hold
selects the most recently active
‘auto’ channel to remain active (gated on), or a specified channel to become active (gated on), whenever signals are no longer present.
Logic Outputs Follow Designated Mic / Last Mic Hold
causes logic outputs to turn on when corresponding channels are activated (gated
on) due to their assignment as Designated Mic On or Last Mic On. Direct Outputs Follow Designated Mic / Last Mic Hold
causes direct
outputs to turn on when corresponding channels are activated (gated on) due to their assignment as Designated Mic On or Last Mic On.
NOTE: If Logic Outputs or Direct Outputs are not assigned to follow Designated Mic / Last Mic Hold, they will still follow normal gating
activity of the channels, but will not hold without signal (as Last Mic Hold) and will not turn on without signal (as Designated Mic On).
Manual Mode
defeats the channel gating functions, turning all channels on to Main Out & Aux Out (except for channels specifically
assigned as ‘off’). Disable NOM Attenuation
defeats the typical attenuation (3dB for each doubling of active ‘auto’ channels) which occurs
at Main Out. Help
provides additional instruction. Close will close the Automixer Settings screen.