Use and Care Manual

8
INSTALLATION
Fig 13 Fig 14
Fig 15
Fig 16
www.advaning.com
Place bracket over
pre-drilled holes and
use a level to ensure
the bracket is leveled
and square to line.
Use a lag screw and
washer to secure the
bracket to your wall/
surface, repeat for
each bracket.
For proper installation
of brackets on uneven
surfaces or siding, use
shims or spacers to level
the bracket.
Due to a variety of
siding nishes/materials,
Advaning recommends
contacting the siding
manufacture for
necessary requirements
before using shims,
cutting or drilling into
your siding.
Masonry Installation
General (solid) masonry
installation
Masonry Installation detailed photos and tips available via www.advaning.com
CAUTION: Brackets must
be installed directly onto
solid brick or concrete.
Avoid severe personal
injury & property damage
- Never install brackets to
grout, mortar or hollow
masonry substrates
Bracket
Bracket
washer
Washer
Lag screw
Lag screw
Shim/spacer
Siding
Wall
Wall
Level
8
9
8
9