Use and Care Manual

7
INSTALLATION
Fig 9
Fig 10
Fig 11 Fig 12
www.advaning.com
General stud framing
installation
WALL MOUNT
INSTALLATION
Measure and mark
where the top of your
awning bracket will
be placed.
Use a level and chalk
line or laser level to
mark your bracket
guide line.
Locate and mark
the center of the
wall studs along this
line using a st ud
nder. *Follow your
specic stud nders
manufacturer’s
instructions to
properly locate studs.
Align the top of the
bracket to the chalk
line.
Align the center of
the bracket mounting
holes with the center
of the stud.
Use a level to make
sure the bracket is
straight and mark
the center of the
mounting holes.
Drill mounting pilot
holes.
Bracket
Center of stud
Wood
3.5”
1
Minimum 1 inch
Level
Chalkliner
Stud nder
Level
1
Recommended
8~10 feet
2
3
4
5
6
7
Marker/pencil
1
2
3
4
5
6
7