Instructions / Assembly

16
INSTALLATION
Fig 38
Fig 39
INSTALLING AWNING
ONTO BRACKETS
Remove the retaining
bolts from each bracket.
Lift and slide the awning
to brackets and slide
the torsion bar into the
bracket fork.
Insert the retaining bolt
and washer into the
bracket fork holes and
secure with nut.
Securely tighten the bolts
with a socket wrench.
CAUTION: The arms contain
tensioned springs and may
release very quickly.
Before removing the safety
restraints, make sure that no
persons or objects are direct-
ly in arm projection path.
Motorized Awning: Do not
plug in the power cord at this
step.
READY YOUR
AWNING
Position yourself un-
der the awning.
With scissors, care-
fully cut the safety
restraints from the
arms one at a time.
Avoid damaging your
awning – Do not use
a knife or blade.
Fig 41
Fig 40
Socket wrench
Washer
Retaining
bolt
Nut
Torsion bar
1
1
2
2
3
3
4
4
1
2
1
2