Instructions / Assembly

14
INSTALLATION
Re-insert the hex bolt
with washer through
bracket and into the xed
sleeve.
Tighten the hex bolts to
secure wall bracket to
surface.
Fig 31
Fig 30
Fig 32
Fig 33
SOFFIT/CEILING
INSTALLATION
Locate a main structural
support (ex: stud/truss),
straight at and leveled
edge of your roof, eave
or overhang that is clear
and free of obstructions.
Using a chalk line or la-
ser level, mark a line that
runs the entire length of
your awning. The awning
will stand 10” off of this
line.
Use the recommended
bracket location chart
(page 5) to determine
bracket locations for your
awning model along the
line.
General wood framing
installation
Tighten
BracketBracket
Hex bolt
Wall
Wall
Masonry Installation detailed photos and tips available via www.advaning.com
Roof, eave or overhang
Chalkliner
Minimum 10 inch
clear space
Roof, eave or overhang
Bracket locations base on your awning model
11
12
11
12
1
2
3
1
2
3