Instructions / Assembly

13
INSTALLATION
Fig 25
Drill mounting pilot holes.
Insert an expansion
bolt set into each of the
drilled bracket holes.
Leave the hex bolt head
outside of the hole.
Using a socket wrench
tighten the hex bolt, this
will cause the anchor/
wedge to expand and
lock the sleeve in place.
Unscrew and remove
the hex bolt. Ensuring
the sleeve and anchor/
wedge are locked within
the wall.
Place the wall bracket
over the holes and use
a level to make sure the
bracket is straight.
Fig 26
Fig 28
Fig 29
Fig 27
Solid
Masonry
Wall
4 1/8”
Socket
wrench
Level
Expansion bolt set
Hex bolt
Tighten bolt head
Leave hex bolt
head outside
Wall
Wall
Bracket
5
5
6
7
8
9
10
6
7
8
9
10