Instructions / Assembly

11
Fig 18 Fig 19
Fig 20
INSTALLATION
Use a level to make sure
the bracket is straight
and mark the center of
the mounting holes.
Drill mounting pilot
holes.
Place bracket over pre-
drilled holes and use a
level to ensure the brack-
et is leveled and square
to line.
Use a lag screw and wash-
er to secure the bracket
to your wall/surface, re-
peat for each bracket.
For proper installation of
brackets on uneven surfaces
or siding, use shims or spac-
ers to level the bracket.
Due to a variety of siding
nishes/materials, Advaning
recommends contacting the
siding manufacture for nec-
essary requirements before
using shims, cutting or drill-
ing into your siding.
Fig 16 Fig 17
Level
Washer
Lag screw
Shim/spacer
Siding
Wall
Bracket
Bracket
washer
Lag screw
Wall
Level
Wood
3.5”
8
8
9
9
6
7
Marker/pencil
6
7