Use and Care Manual

7
INSTALLATION
Fig 9
Fig 10
Fig 11 Fig 12
Standard stud
installation
INSTALLING WALL
BRACKETS
Measure and mark
where the top of your
awning bracket will
be placed.
Use a regular level
and chalk line or a
laser level, mark a
straight level line.
Locate and mark the
center of the wall
studs along this line
using a st ud nder.
*Please follow the di-
rections of your stud
nder as instructed
by the manufacturer.
Align the top of the
bracket to the chalk
line.
Align the center of
the bracket mounting
holes with the center
of the stud.
Use a level to make
sure the bracket is
straight and mark the
center of the mount-
ing holes.
Drill mounting holes
using a drill bit.
www.advaning.com
Stud nder
Level
1
Minimum 1 inch
Bracket
Center of stud
Wall
3.5”
Level
Chalkliner
1
Recommended
8~10 feet
2
3
4
5
6
7
Marker/pencil
1
2
3
4
5
6
7