Use and Care Manual

7
INSTALLATION
Fig 9
Fig 10
Fig 11 Fig 12
General stud framing
installation
WALL MOUNT
INSTALLATION
Measure and mark
where the top of your
awning bracket will
be placed.
Use a level and chalk
line or laser level to
mark your bracket
guide line.
Locate and mark the
center of the wall
studs along this line
using a st ud nder.
*Follow your specic
stud nders manufac-
turer’s instructions to
properly locate studs.
Align the top of the
bracket to the chalk
line.
Align the center of
the bracket mounting
holes with the center
of the stud.
Use a level to make
sure the bracket is
straight and mark the
center of the mount-
ing holes.
Drill mounting pilot
holes.
www.advaning.com
Stud nder
Level
1
Recommended, 1 inch.
Bracket
Center of stud
Wood
3.5”
Level
Chalkliner
1
Recommended
8~10 feet
2
3
4
5
6
7
Marker/pencil
1
2
3
4
5
6
7