Owner's Manual

13
www.advaning.com Toll Free (US): [phone]
INSTALLATION
Fig 34
Fig 36
Fig 35
Position yourself
under the awning.
Remove the safety
restraints from the
arms one at a time.
Do not use a knife
or blade to cut the
restraints.
READY YOUR
AWNING
USING REMOTE
CONTROL
Remove battery cover
from the back of the
remote control and install
the battery in the remote
control.
Plug into a GFI rated
outdoor socket.
Use a drip loop to
avoid water collecting
on electrical socket.
INSTALL POWER
CORD FOR
ELECTRIC MODELS
WARNING: DO NOT
attempt to modify the
plug in any way.
WARNING: DO NOT
plug in the power cord
until the following steps
have been completed.
Before removing the
safety restraints, make
sure that no persons or
objects are directly in
arm projection path. The
arms contain tensioned
springs and may release
very quickly. Failure to do
so could result in property
damage, severe personal
injury.
Drip loop
Battery cover
Back of remote
CR2430
Battery
CR2430
1
1
1
1
2
2
2
2