Installation Guide

7
INSTALLATION
Peel the protective
lm from both the
top and bottom back
about 2” from the
right and left edges
of the awning sheet
Apply the (short) rub-
ber strip for the right
and left edge of the
awning sheet. Trim
off all excess rubber
strip material.
Add the left and right
awning brackets onto
the awning sheet.
Bend the awning
sheet to the curve of
the brackets.
Secure the awning
sheet to the brackets
with the (4) bracket
screws.
www.advaning.com Toll Free (US): [phone]
Fig 11
Fig 12
Fig 13
Fig 14
6
7
8
8
9
9
7
6