Installation Guide

Wall
9
INSTALLATION
INSTALL THE
DOOR AWNING
Hold the assembled
Door Awning in the
area you want to in-
stall it and use a level
to ensure that the
Door Awning is lev-
eled.
Mark the positions of
the 4 mounting holes
through the bracket
holes using a marker/
pencil.
Drill the mounting
holes using a drill bit.
CAUTION: Make sure to
use the appropriate sized
drill bit for the mounting
screws.
Do not drill where elec-
trical wires or gas and
water pipes may exist.
It is recommended that
you have a minimum of 2
people during installation
www.advaning.com Toll Free (US): [phone]
Fig 17
Fig 18
Marker / Pencil
Marker / Pencil
1
1
2
2
3
3