User's Manual

Version: 1, Issue Date: July 20, 2007 Page 5 of 10
Charge the battery for 12 hours on the first charge. Subsequent charges should take 3 hours or less.
1. Plug the adaptor output into the socket on the back side of charger
.
2. Plug the adaptor in the main.
3. The Desktop charger can charge both the radio and a separated battery.
4. LED indicates the charging condition: one for radio unit, and another for separated battery.
If there is no battery in cradle, LED is RED. While Radio unit or battery is placed into the cradle, the
LED will becomeGreen. After charging fully, the LED will become RED.
NOTE
1. To maintain the battery life of your radio it is recommended that you only charge the battery when needed.
Overcharging the battery will reduce performance.
2. Ensure that the unit is turned off before charging.
3. Remove batteries before storing your radio for extended periods. Batteries corrode over time and may
cause permanent damage to your radio.
4.Please use the specified power adaptor within the same rating.
2. INSTALLING THE BELT CLIP
Rotate the clip to be suitable for Horizontal or Vertical mounting on the belt.
View of Separated Battery
charging