Users Manual
4. Programmable function key function
There are four programmable function keys that may be dened
in software. These buttons are noted as K1, K2, K3, and TK.
Programmable buttons can be modied by the CPS.
Programmable button function denition list
Button Status Button
Assignment Function
K1
K2
K3
Short
Press
No [unction; emergency alarm; cancel
emergency alarm; voice control; power switching;
steady state monitoring [analog]; transient
monitoring [analog]; steady state cancellation
squelch [analog]; transient cancellation squelch
[analog]; Talk Around; o-line; scan; one-touch
call 1 (DMR); one-touch call 2 (DMR); one-touch
call 3 (DMR); one-touch call 4 (DMR); broadcast
local ID [number]; broadcast channel Number;
broadcast power; broadcast battery power;
Long
Press
No function; emergency alarm; cancel
emergency alarm; voice control; power switching;
steady state monitoring [analog]; transient
monitoring [analog]; steady state cancellation
squelch [analog]; transient cancellation squelch
[analog]; Talk Around; o-line; scan; one-touch
call 1 (DMR); one-touch call 2 (DMR); one-
touch call 3 (DMR); one-touch call 4 (DMR);
broadcast local ID [number]; broadcast channel
Number; broadcast power; broadcast battery
power; broadcast channel type; serial port report
(production version only);
Key function description:
1. No function: No function denition, the button is invalid and there
is an error tone.
2. Emergency alarm: Press this button to initiate an emergency alert,
which is typically associated with the top orange button. Emergency
is only supported by a short key press. A long key press is associated
with emergency o.