User's Manual

to talk and listen to the person transmitting without changing channels.
1. To start scanning, briefly press the key programmed as “Scan”. the radio
begins to scan the channels.
When the radio detects activity, it stops on that channel.
2. To talk to the person transmitting without switching channels, press PTT
within 5 seconds. If no transmission occurs within 5 seconds, scanning resumes.
Note: these timers can be changed by the programming software.
3. To stop scanning, briefly press “Scan” Key.
If you press PTT while the radio is scanning, the radio transmits on the channel
you were on before you started scanning.
Without Priority Channel
Providing that there is a scan list with 6 channels and all channels
are non-prioritized, the normal scan operation would proceed in the