O WNER’S M ANUAL AWR391 UHF 460-470 MHz Two - W AY R ADIO 20809 Kensington Blvd. Lakeville, MN 55044 1-800-475-5852 www.advancedwireless.
AWR391(The Mini): UHF 460-470 MHz 420855102498 6-Ganged Charger Model Number: 420855208640
1.3 cm between the back of the radio and the user’s body. AWC-approved accessories, antennas, Using non AWC approved accessories may result in exposure levels which exceed the FCC’s for use with this radio.
CONTENTS Thank You! ............................................................................. I FCC Declaration ..................................................................... II-IV Contents ................................................................................ V Introduction ........................................................................... 1 Getting Acquainted ................................................................. 1 Product inspection ...............................
INTRODUCTION Advanced Wireless Communications is a leader in the design and integration of wireless communications solutions. Since 1992, we’ve been creating on site wireless systems that help businesses communicate effectively. Whether it’s a national chain of retail stores, a 50-story office tower, construction site, a large distribution center, a college campus or a retirement home, Advanced Wireless has the expertise and experience to create the best solution possible...
TRANSCEIVER RADIO VIEW 0 6 7 1 8 2 9 3 10 11 4 5 Front View: 0. Antenna Receives and transmits signals 1. LED indicator Lights up red when transmitting a signal 2. Channel Up Press and hold for more than 1.5 seconds to activate the auto scan or dual watch (selected by PC program) for available channel. While radio is on, press button to increase channel no. 3. Channel Down Press and hold for more than 1.5 seconds to activate the key lock.While radio is on, press button to decrease channel no. 4.
7. Headset jack Allows use of headset for hands-free communication. 8. Push to talk Press and hold PTT button, speak into the microphone using your normal speaking voice. 9. Volume Up Press and hold more than 1.5 seconds to rapidly increase the volume. While radio is on, press button to increase the volume by a single unit. 10. Volume Down Press and hold for more than 1.5 seconds to rapidly decrease the volume. While radio is on, press button to decrease the volume by a single unit. 11.
LCD DISPLAY SYMBOLS SYMBOL FUNCTION Channel number: Select between 22 channels Dual Watch: Scan 2 channels Battery indicator: Provides battery status during operation Keypad lock: Locks keypad to prevent accidental button activation Auto-scan: Unit is scanning Channels or CTCSS VOX: Voice activation system 6-GANG CHARGER VIEW 1 2 3 4 5 6 1. Docking cradle 2. DC adaptor socket: Charge radio units; provide power for cloning operation 3.
4. USB socket: download settings from PC to radio units 5. CHG-CLON switch: Charge radio units; clone radio unit settings 6. PROG: Clone radio unit settings from source radio to other radio units SAFETY AND CARE INSTRUCTIONS SAFETY PRECAUTIONS Please observe the following safety precautions when setting up and using this product. * LCD panel – The LCD panel is made of glass, and may break if the unit is dropped or impacted.
GETTING STARTED INSTALLING / REMOVING / CHARGING THE BATTERY To insert the battery: 1. 2. 3. Slide the battery door open. Insert the lithium battery into the battery compartment, making sure the polarities (+ and –) match. Slide the back cover and clip into place. WARNING: There is a danger in which incorrectly placing the battery can cause an explosion. Always make sure the radio is switched off before installing or changing the battery. Replace only with the same or equipment type.
NOTE: To completely disconnect from power, the adapter should be disconnected from the 6-Ganged Charger. Batteries should not be exposed to excessive heat such as sunshine or fire. The 6-Ganged Charger and adapter should not be exposed to wet conditions. No objects filled with liquid, such as vases, should be placed on the main unit and adapter. To maintain the battery life of your two-way transceiver it is recommended that you only charge the battery when needed.
KEYPAD LOCK To avoid accidentally changing the channel and the unit’s preferred settings, you can lock the keypad. To lock or unlock the keypad: Press and hold for 1.5 seconds. appears when the keypad is locked. NOTE: While the keypad is on you can still use the and . SELECT A CHANNEL The transmitter and receiver must be on the same channel using the same CTCSS code or DCS code in order for you to communicate with another party.
SCAN / DW FOR A CHANNEL / CTCSS / DCS will be disabled when Scan function is activated. NOTE: or To auto-scan / DW for a channel / CTCSS / DCS: 1. 2. DW or Scan function is selected by PC program. Channel for DW is chosen by PC program. 3. Press and release 4. to enter the Tx mode on the last valid channel in memory and Press continue to scan after the button is released. 5. Long press to terminate the All Scan mode. The radio will then return to the last valid channel. to enter scan mode.
OPTIONAL ACCESSORIES Picture Part number Model No.
420855209586 AWAB-391 Armband for Mini 391 420855207087 AWEM391 Ear Mold Left Large 420855204420 AWEM391 Ear Mold Left Medium 420855207094 AWEM391 Ear Mold Right Large 420855204413 AWEM391 Ear Mold Right Medium 420855207070 AWEM391 Ear Mold Right Small 420855209722 AWM-391 Magnetic Mount For Holding Radio 420855209289 AWB-391 Battery for Mini 391 Radio 420855209241 AWSH-391 Holster Swivel These products are available form: Advanced Wireless Communications at 1800-475-5852 or www.
