Users Manual

Electromagnetic Interference/Compatibility
energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in ares
where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electronmagnetic radiation
such as hospitals, aircraft, and blasting sites.
Occupational/Controlled Use
The radio transmitter is used in situations in which persons are exposed as consequence of their employment provided those
Attention:
This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure emvironment at operating duty
factors of up to 50% and is authorized by the FCC for occupational use only. An appropriate warning lable is affixed to all units.
In order to comply with RF exposure requirements, a minimum distance of 2.5cm must be maintained when held-to-face,and body-
worn operations are restricted to the approved original acessories (belt chlip). Don't use this device when antenna shows obvious
damages.
This product is compliance to FCC RF Exposure requirements and refers to FCC website
further information include SAR Values.
https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for(Model:AWR-D6500 , FCC ID : Q9SAWR-D6500 ) to gain
persons are fully aware of the potential for exposure and can exercise control over their exposure.
Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications.
During transmissions,
radio generates RF