User's Manual

User Manual
8
4. Now you can enjoy your radio with your Bluetooth headset.
Receive a Call
When the radio receives a call, you will hear the voice in you Bluetooth headset directly.
Adjust the headset volume
1. Slide Key2 to – direction and hold to decrease the volume
2. Slide Key2 to + direction and hold to increase the volume
Make a Call
In standby mode, click the key3 twice to make a call, the radio will enter transmit state. Click Key3 again to end the call. The radio will enter
receive mode.
The Usage of the Bluetooth Headset to the mobile
Pairing to 1 device:
1. In the power off state, push the power switch to position, there will be light flashing with red and blue to entry into pairing mode.
2. Activate the Bluetooth search feature on your phone. Refer to your phone’s manual for further instructions
3.
The headset will have voice prompt when paired successful, now you can enjoy your Bluetooth headset.
Pairing to 2 devices:
This headset contains a dual-link function for connection with 2 mobile phones simultaneously.
1. Pair the first phone following the steps above.
2. Temporarily disenable the first connected phone’s Bluetooth function.
3. Pair the second phone using the steps above.
4. Turn off the headset, in the mean time enable the first phone Bluetooth function.
5. Turn on the headset again, it will connect to both devices automatically.
Receive the call
When there is an incoming call, the headset automatically read caller phone number (Required phone support), click key3 to answer the call.
Language Answering
When there is an incoming call, and the headset finished to read the caller phone number, you can say “YES” to answer the call or say “NO” to
reject it.
Note: Voice answer or reject a call in a noisy environment may not be realized.