Service Manual

10
(1) Password contains 6 digits (0-9).
(2) After correct password is checked, a new password can be entered and original one can be
cancelled.
(3) Press [SCAN] to enter password-entering mode.
(4) Press [UP]/[DOWN] to enter digits (0-9).
(5) Press [SCAN] to delete entered password or cancel password.
Delete entered password: LCD displays“------”. The first “-” blinks.
Cancel password: LCD displays “CANCEL”. “CANCEL” blinks.
(6) Press [PTT] to confirm the entered.
If password is less than 6 digits, enter other ones until there are 6 digits.
After entering a 6-digit password, password is checked.
After entering a 6-digit new password, new password is set.
Cancel Password Check when LCD displays “CANCEL”.
(7) Press [MONI] to exit.
If password is being checked, pressing [MONI] cannot exit password-entering mode.
When entering a new password, press [MONI] to exit and enter reset option.
Power On Menu
Turn on the radio while holding down [PTT] and [MONI] simultaneously, in 3 seconds, the following
enabled options are displayed:
(1) Tune mode.
LCD displays “tUNE”.
(2) Channel set
LCD displays “ CHSEt”.
(3) Function set
LCD displays “ FUNSEt”.
(4) Keys combination set
LCD displays “ASSIgn”.
Operations: Press [UP]/[DOWN] to select the next menu option.
Press [PTT] to enter option setting.
Note: All menu options can be enabled or disabled by the dealer in dealer mode.
If one menu option is disabled by the dealer, then this option is skipped; if all options are set invalid,
the radio directly enters user mode.
Channel set
1. Select “CHSEt” in Power On Menu. The radio enters channel set mode. Now LCD displays
channel number as follows: