Service Manual

LCD displays “SENS H” ([PTT]: R/T, SCAN, wide/narrow)

(11).

Center Frequency with CTCSS 250.3 check

LCD displays “SENC 38” ([PTT]: R/T, SCAN, wide/narrow)

Operations: Press [UP]/[DOWN] to select the next menu option.

Press [PTT] to enter option settings:

In [1]-[7] options, LCD displays blinking digits. Now press [UP]/[DOWN] to adjust, press [MONI]

to exit.

In [8]-[11] options, C/L/H blinks, indicating center frequency, low frequency or high frequency. If

wideband, “F” is displayed; if narrowband, “Fn” is displayed.

Now press [MONI] to exit; press [SCAN] to switch the band between wide and narrow. Press

[UP]/[DOWN] to change power between high and low.

Note: Center, low and high frequency can be changed by PC programming software.

Keys combination set

Select “ASSIgn” in Power On menu. The radio will enter keys combination set mode.

1. Set [MONI]+[UP] valid/invalid. LCD displays UP on/oFF.

2. Set [MONI]+[Down] valid/invalid. LCD displays dn on/oFF.

3. Set [MONI]+[SCAN] valid/invalid. LCD displays SCN on/oFF.

4. Set [MONI]+[PTT] valid/invalid. LCD displays Ptt on/oFF.

Above keys combinations are valid only in user mode.

Operations:

Press [UP]/[DOWN] to toggle the keys combination between on and off.

Press [PTT] to save the setting and enter the next option setting.

Press [MONI] to exit the mode and return to “ASSIgn” option in Power On Menu.