Use Instructions
Table Of Contents
- Device Description
- Indications for Use
- Components Included with the Cardi/o Remote Patient Monitor System
- CARDI/O® USE INSTRUCTIONS
- Cardi/o® Overview
- Cardi/o® Remote Patient Monitor (RMP) may be use for synchronous telehealth consultations where real-time intermittent spot-checking of vital signs may be desired; and for asynchronous telehealth consultations where historical data can be viewed and d...
- Step 1. Connect the Cardi/o® Sensor to the Internet via WiFi
- Scan the barcode containing a unique ID that is located on the sensor device with a smart phone, then input the local WiFi passcode to complete the Sensor connection.
- Determine whether the Cardi/o® RMP will be for intermittent use or long-term use and position the Sensor device according to Figure A or Figure B below.
- Step 2.A Positioning Cardi/o® for Intermittent Use – tabletop option
- Step 2.B Positioning Cardi/o® for Long Term Use – wall-mount option
- Step 3. Accessing Patient Data
- Step 4. Managing Patient Alerts
- Step 5. Downloading and Reporting Data
- Cardi/o® Sensor Return or Disposal
- Troubleshooting
- Contact Information
- Product Specifications
- General Symbols
IFU-EUA Rev. 01
Date: 01Sep2020
Page 12 of 17
Product Specifications
Measurements Heart Rate Dynamic Range Not available for patients with pacemakers.
20 – 180 Beats Per Minute (BPM)
Accuracy tested +/- 2 BPM of 3-lead ECG
Respiration Rate Dynamic Range Not available for patients with pacemakers.
0 – 60 breaths per minute (bpm)
Accuracy tested +/- 2 BPM of 3-lead ECG
Stress ~ Heart Rate Variability (stationary
and ambulatory)
Not available for patients with pacemakers.
Ratio of Low Frequency to High Frequency
(LF/HF); also known as “HRV Score”
Dynamic sensing range
10-feet (3-meter) max separation between
subject and Cardi/o
®
Sensor
o 2-inch (5 cm) minimum separation
Communications
WiFi WLAN Standard IEEE 802.11b/g/n, Wi-Fi compliant
Serial WiFi (eS-WiFiTM) ISM43362-M3G-L44
Radio Frequency Range 24.0 – 24.497 GHz ISM
Modulation 802.11 g/n : OFDM /64-QAM,16-QAM, QPSK,
BPSK
802.11b : CCK, DQPSK, DBPSK
Max Power Output 802.11n /72Mbps: 18* dBm ± 1.5 dB
Security Wi-Fi authentication WEP-128, WPA-PSK
(TKIP), WPA2-PSK.
Power
AC Adapter Input 110V – 240V – 50/60 Hz 0.4A max
Output 5.9V 2.0A max
Operating
Conditions
Humidity 10 – 95% RH (noncondensing)
Altitude <3000 m
Barometric Pressure 70 kPa to 102 kPa
Ambient Temperature 0 – 70°C