User Manual

Trilogue-1NM
User Manual V1.4
Advanced RF Technologies, Inc. Proprietary Document Page 26 of 43
At these windows, the user can adjust the following parameters:
3.3.1 General Setting
CDMA
- Automatic Gain Control (Default mode is Off)
- Downlink HPA on/off (Default mode is On)
- Uplink HPA on/off (Default mode is On)
- Uplink Tracking Mode on/off (Default mode is Off)
iDEN
- Automatic Gain Control (Default mode is Off)
- Downlink HPA on/off (Default mode is On)
- Uplink HPA on/off (Default mode is On)
- Uplink Tracking Mode on/off (Default mode is Off)
3.3.2 Manual Gain Control
- Downlink Gain Control
CDMA: 40 to 80 dB @ 0.5 dB step
iDEN: 40 to 65 dB @ 0.5 dB step
- Uplink Gain Control
CDMA: 40 to 80 dB @ 0.5 dB step
iDEN: 40 to 65 dB @ 0.5 dB step
- Downlink AGC Level
CDMA: 0 to 24 dBm @ 0.5 dB step, default value: 24 dBm
iDEN: 15 to 25 dBm @ 0.5 dB step, default value: 25 dBm
- Uplink AGC Level
CDMA: 0 to 24 dBm @ 0.5 dB step, default value: 24 dBm
iDEN: 15 to 25 dBm @ 0.5 dB step, default value: 25 dBm
- Uplink Tracking Offset
CDMA: (0 to 10 dB @ 0.5 dB step, default value is 3 dB)
iDEN: (0 to 10 dB @ 0.5 dB step, default value is 3 dB)
3.3.3 System
- If you click the Reboot button, the following message box will appear:
When the system reboots, the last settings for CDMA and iDEN will be saved.