User Manual

Trilogue-1NM
User Manual V1.4
Advanced RF Technologies, Inc. Proprietary Document Page 23 of 43
- iDEN Band: Will display the center frequencies of the 800 and 900 MHz
spectrums on the downlink and uplink respectively.
- Power and Gain(iDEN): Will display the repeater input, gain and output
power on the downlink and uplink, except only uplink input.
Parameters Range Step Size
DL/UL Output Power -10 ~ 25 dBm 0.1 dB
DL Input Power -10~ -95 dBm 0.1 dB
Gain 40 ~ 65 dB 0.5 dB
- Alarm: Will display five alarms with three different status conditions (Normal,
Soft Fail or Hard Fail). ‘Under Current’, ‘Over Temperature’, and ‘VSWR at
Server’ are common alarms for Trilogue-1NM itself. But ‘RSSI at donor’ and
‘RF Power’ are respective alarms for iDEN and CDMA.
- Message Board (CDMA): Will show up to recent 20 log messages for
CDMA operation (alarms) & Heartbeats on the CDMA status window.
- Message Board (iDEN): Will show up to recent 20 log messages for iDEN
operation (alarms) & Heartbeats on the iDEN status window.
- Installation (CDMA): Will display CDMA repeater’s installation status (Not
Installed or Installed).
- Installation (iDEN): Will display iDEN repeater’s installation status (Not
Installed or Installed).
- Repeater Info: Will display the Trilogue-1NM’s serial number, and location
Table 3 – The displayed value ranges on the iDEN status