User Manual

Trilogue-1NM
User Manual V1.4
Advanced RF Technologies, Inc. Proprietary Document Page 21 of 43
3.2 Repeater Status
If you click on
Status tab, the following window will appear:
In this window, the user can view the following:
(
To change any parameters, e.g., PCS Sub-Bands, Instantaneous Band Width,
Gain Settings, AGC Level, etc., you must go to the Install or the Control
window.)
By clicking the CDMA button, the user can check the status of the CDMA
subsystem. The CDMA button turns black and the iDEN button turns gray.
- CDMA Band: Will display the center frequencies of the 1900 MHz
spectrums on the downlink and uplink respectively.