User Manual

Trilogue-1NM
User Manual V1.4
Advanced RF Technologies, Inc. Proprietary Document Page 12 of 43
2.2 Switches & Indicators
2.2.1 LEDs
Trilogue-1NM has five LEDs on the front panel of the repeater as shown
below in Figure 4.
POWER
If the LED is lit GREEN, it indicates that there is AC power to the repeater
SOFT FAIL
If the LED is lit YELLOW, it indicates that there is a soft fail alarm in the
system. The detailed alarm information can be viewed via the local web GUI.
In the event of a soft fail alarm, the repeater will still function, but the alarm
needs to be addressed promptly.
HARD FAIL
If the LED is lit RED, it indicates that there is a hard fail alarm in the system.
The detailed alarm information can be viewed via the local web GUI. In the
event of a hard fail alarm, the repeater will not function and immediate
attention is required.
Figure 4 – Trilogue-1NM Repeater LED View