Manualshelf

User Manual

ManualsBrandsAdvanced RF Technologies ManualsElectronicsEpoch-III-P8024NM, Epoch-III-P8030NM, and Epoch-III-P8037NM repeaters with 5, 10, and 15 MHz filtering (1900 MHz band)
21222324252627282930
Epoch-III-P8024/8030/8037NM
User Manual V1.6
Advanced RF Technologies, Inc. Proprietary Document Page 25 of 41
3.4 Repeater Install
If you click on the
Install tab, the following window will appear:
Band Selection
Simply click on the desired operating bandwidth.
The Epoch-III-P8024/8030/8037NM has three independent RF paths: Path 1, Path
2, and Path 3. Path 1 supports 5 MHz bandwidth. Path 2 supports 5 or 10 MHz
bandwidths. Path 3 supports 5 or 15 MHz bandwidths.
One can use only one Path (single band: Path 1, Path 2 or Path 3), any of the two
Paths (Two contiguous or non-contiguous sub-bands: Path 1 and Path 2, Path 2
and Path 3, Path 1 and Path 3), or all three Paths (Three contiguous or non-
contiguous sub-bands: Path1, Path 2 and Path 3). Therefore, the instantaneous
bandwidth that the Epoch-III-P8024/8030/8037NM supports is 5, 10, 15, 20, 25 or
30 MHz.
The following Band Selection shows that A1 (5 MHz) is selected in Path 1, A3+D
(10 MHz) is selected in Path 2, and the entire B band (15 MHz) is selected in
Path 3.