User Manual

Epoch-III-P8024/8030/8037NM
User Manual V1.6
Advanced RF Technologies, Inc. Proprietary Document Page 22 of 41
- Power & Gain: Will display the repeater input, gain and output power on the
downlink and uplink.
- Alarm: Will display five alarms with three different status conditions (Normal,
Soft Fail or Hard Fail).
- Message Board: Will show up to recent 20 log messages (Alarms &
Heartbeats).
- Installation: Will display repeater’s installation status (Not Installed or
Installed).
- Repeater Info: Will display repeater’s serial number, and location
information (latitude and longitude coordinates).
- Repeater Location: Will display the address where the repeater is installed
- Technical Support: Will display ADRF’s technical support contact
information.
- Installer Contact Info: Will display the installer’s name, phone and e-mail
address.
Note: Once successfully logged in, the repeater model name and the site/cascade
ID will be displayed on the top of all the windows.
Parameters Range Step Size
Epoch-III-P8024NM -10 ~ 24 dBm
Epoch-III-P8030NM -10 ~ 30 dBm
DL/UL Output Power
Epoch-III-P8037NM -10 ~ 37 dBm
0.1 dB
Epoch-III-P8024NM -12 ~ -97 dBm
Epoch-III-P8030NM -12 ~ -100 dBm
DL/UL Input Power
Epoch-III-P8037NM -12 ~ -100 dBm
0.1 dB
Epoch-III-P8024NM 40 ~ 80 dB 0.5 dB
Epoch-III-P8030NM 50 ~ 80 dB 0.5 dB
Gain
Epoch-III-P8037NM 50 ~ 80 dB 0.5 dB