User's Manual

Epoch-III-C9024/9030/9533
User Manual V0.1
Advanced RF Technologies, Inc. Proprietary Document Page 13 of 36
2.2.2 AC Power Switch & Battery Port for Ethernet Port
The AC Power on/off switch is located on the bottom of repeater (Figure 5).
The switch should be powered on after the repeater has been installed properly.
The Battery Port for are located on the bottom of the repeater as shown below
in Figure 5.
2.2.3 Ethernet Port
The Ethernet ports for DHCP are located on the bottom of the repeater as
shown below in Figure 6.
Figure 6 – Ethernet Port
Figure 5 – EPOCH-III-C9024/9030/9533 Repeater Power Switch & Battery Port (only 9024)