User's Manual

Epoch-H (HP/HC) RF Repeater
User Manual V1.5
Advanced RF Technologies, Inc. Proprietary Document Page 49 of 60
Appendix A: Epoch-HP Specifications
A.1 Electrical Specifications
Parameters Specifications Comments
Frequency
Range
Downlink 1930~1995 MHz
Uplink 1850~1915 MHz
Frequency Error
  0.05 ppm
Band Selection 5/10 MHz + 5/15 MHz
Gain Flatness
Full band
 1 dB
Each band
 2.5 dB
Gain
Maximum 95 dB
Step 0.5 dB
Range DL/UL Epoch-HP5W / 10W / 20W 30 dB
Tolerance
 1 dB
Composite
Output Power
(Down Link)
Epoch-HP 5W +37 dBm
Epoch-HP 10W +40 dBm
Epoch-HP 20W +43 dBm
Output Power (Up Link) +27 dBm
AGC Error
 0.5 dB
Inband Spurious emissions
 29 dBc/30 kHz @ Fc  885 KHz (3FA)
30kHz RBW
 39 dBc/30 kHz @ Fc  1.98 MHz (3FA)
 -13 dBm/1 MHz @ Fc  2.25 MHz (1FA)
1MHz RBW
Outband Spurious emissions
9KHz ~ 150KHz  -36dBm / 1KHz
1kHz RBW
150KHz ~ 30MHz  -36dBm / 10KHz
10kHz RBW
30MHz ~ 1GHz  -36dBm / 100KHz
100kHz RBW
1GHz ~ 12.75GHz

-30dBm / 1MHz
1MHz RBW
Roll offs > 50 dBc @1 MHz outside passband
Noise Figure (Up link)
 5.0 dB@ Max gain
 7.0 dB@ Min gain
Delay
 5 us
VSWR

1.5:1