User's Manual

Epoch-H (HP/HC) RF Repeater
User Manual V1.5
Advanced RF Technologies, Inc. Proprietary Document Page 41 of 60
Instead of “Obtain an IP address automatically”, please select “Use the following IP
address” and input the following values:
IP address: 192.168.63.2
Subnet mask: 255.255.255.0
iii) If you see the icon in Figure 19, then the IP Address has been obtained. If you
see this icon and still cannot connect to the unit, then please follow the steps listed below.
Figure-19
Verify HOST/REMOTE switch is set to the HOST mode.
- When the unit is set to Host Mode, the IP address for the unit is 192.168.63.1
- When the unit is set to Remote Mode, the IP address for the unit is 192.168.63.5
Please note the only time ‘REMOTE’ mode is utilized is for modem box monitoring.
iv) Use Microsoft Internet Explorer (Version 6.0 or above) to log into Web GUI
Note: ADRF’s Web GUI is not compatible with other web browsers such as Netscape,
Firefox, Mozilla, Opera, etc.
Please type the following IP address into the address bar of MS Internet Explorer:
http://192.168.63.1/home.asp or http://192.168.63.1/
 The following login screen will appear:
If you are not the Super-User
, please type in your assigned username & password which
you should have received from the Super-User
. The default username and password for
the General User is adrf & adrf, respectively.
If the username & password is typed in incorrectly, the following screen will appear: