User's Manual

Epoch-H (HP/HC) RF Repeater
User Manual V1.5
Advanced RF Technologies, Inc. Proprietary Document Page 36 of 60
ⓔ Auto Installation
Click the Install button to automatically setup the repeater.
It may take up to 3 minutes to complete the process. You will see a gradual
progress bar display. After the process is completed, a pop-up window will
display “Installation Successfully Completed” message.
C
lick on Status tab, the Installation box now changes from “Not Installed” to
“Installed.”
If the Epoch-HC detects a problem during the installation process, it will show
a prompt message, e.g., “Modem is not detected.” Please follow the
instructions and address the problem to finish the installation process.
If the problem persists, please contact our technical support
ⓕ Repeater Location Info
Please type in the physical address where the repeater is installed.
ⓖ Repeater Installer Info
Please type in the installer’s name, phone number and e-mail address for
technical support.
ⓗ Date & Time
Sets the date and time for the internal clock (required for Log Messages)