User's Manual

Epoch-H (HP/HC) RF Repeater
User Manual V1.5
Advanced RF Technologies, Inc. Proprietary Document Page 32 of 60
(two contiguous or non-contiguous sub-bands: Path1and Path 2). Therefore, the
instantaneous bandwidth that the Epoch-HP supports is 5, 10, 15, 20 or 25MHz.
ⓑ SNMP
Type in the assigned Site/Cascade ID and Manager IP Address.
Default Site ID is ADRF.
Default Manager IP address 100.10.10.100
ⓒ Repeater Location
Please type in the physical address where the repeater is installed.
Ex) Latitude: E/W (Upper Case) 034.123456
Longitude: N/S (Upper Case) 034.123456
ⓓ Repeater Static IP: Will display the Repeater’s Static IP Address, Subnet
Mask, and Gateway. This information is necessary when using the Repeater in
conjunction with the External Modem Box. Default values are:
Repeater IP: 192.168.63.5
Subnet Mask: 255.255.255.0
Gateway: 192.168.63.254
ⓔ Auto Installation
Click the Install button to automatically setup the repeater.
It may take up to 3 minutes to complete the process. You will see a gradual
progress bar display. After the process is completed, a pop-up window will
display “Installation Successfully Completed” messa
ge.
C
lick on Status tab, the Installation box now changes from “Not Installed” to
“Installed
.”