User's Manual

Epoch-H (HP/HC) RF Repeater
User Manual V1.5
Advanced RF Technologies, Inc. Proprietary Document Page 31 of 60
3.4 Repeater Install
3.4.1 Epoch-HP
If you click on the Install tab, the following window will appear:
ⓐ Band Selection
Simply click on the desired operating bandwidth.
The Epoch-HP has two independent RF paths: Path 1 and Path 2. Path 1 supports
5 MHz bandwidth or 10MHz bandwidth. Path 2 supports 5 or 15 MHz
bandwidths.
One can use only one Path (single band: Path 1 or Path 2), any of the two Paths
(two contiguous or non-contiguous sub-bands: Path 1 and Path 2), or both paths