User's Manual

Epoch-H (HP/HC) RF Repeater
User Manual V1.5
Advanced RF Technologies, Inc. Proprietary Document Page 28 of 60
3.3 Repeater Control
If you click on Control tab, the following window will appear:
In this window, the user can adjust the following parameters:
ⓐ General Setting
- Automatic Gain Control (Default mode is Off)
- Downlink HPA on/off (Default mode is Off)
- Uplink HPA on/off (Default mode is Off)
AGC Mode
AGC (Auto Gain Control) adjusts the variable gain of the repeater to ensure a
constant specified output power of 37, 40 or 43 dBm (depending on the Epoch-H
model). The functionality of the AGC feature is assured under the condition that
the input BTS signal is within the specified AGC range and that sufficient
isolation exists between antennas. By default, the AGC ON box is checked. To
manually change the gains in both the links, AGC ON must be unchecked.