User's Manual

Epoch-H (HP/HC) RF Repeater
User Manual V1.5
Advanced RF Technologies, Inc. Proprietary Document Page 17 of 60
2.1.4 Ethernet Port
Figure 10 shows the Ethernet port is used to interface with the unit via RJ-45
crossover cable. Please set your network card to Obtain IP Address
automatically and the repeater will assign an IP Address via DHCP.
Figure 10 – Ethernet Port
2.1.5 Modem Module
Figure 11 shows the Modem Module that is used to interface with the unit via
modem. The modem will allow for remote configuration and monitoring via
SNMP.
Figure 11 –
Modem Module