User's Manual

Epoch-H (HP/HC) RF Repeater
User Manual V1.5
Advanced RF Technologies, Inc. Proprietary Document Page 16 of 60
2.1.2 AC Power Switch
The AC Power on/off switch is located on the inside of repeater (Figure 8).
The switch should be powered on after the repeater has been installed properly.
2.1.3 Back Up Battery Switch & Battery Port
The Battery Switch can be used to provide power to the optional External
Backup Battery (Figure 9).
Before connecting the Battery Box to the Repeater, make sure that the
Repeater is powered OFF and that the AC Cable is not plugged into the outlet.
Likewise, the Battery Box’s Circuit Protector Switch should always be turned
OFF.
(WARNING: If the Circuit Protector Switch is not turned OFF there may be a
risk of damage or electric shock)
(Note: Please contact ADRF Technical Support for assistance if you are
unfamiliar with the installation procedure of our battery box.)
Fi
g
ure 8
–
AC Power Switch
Fi
g
ure 9
–
Batter
y
Switch & Batter
y
Po
r
t