User Manual

Epoch-HP RF Repeater
User Manual V1.1
Advanced RF Technologies, Inc. Proprietary Document Page 5 of 36
1. Introduction of Epoch-HP
1.1 Overview
Epoch-HP series repeaters enhances outdoor wireless coverage in the most
effective and cost efficient way. For its intelligent design and versatility, Epoch-
HP series repeaters are the ideal choice for wireless coverage problems outdoors.
In many large scale in-building applications, Epoch-HP series repeaters can also
be used (e.g. malls, campus, stadiums, etc.) with passive antennas instead of a
DAS (distributed antenna system) and offer significant cost savings.
1.1.1 Highlights
• 37, 40 or 43 dBm Composite Output Power
• 95 dB gain
• 30 dB AGC Range @ 0.5 dB Step
• Can Set AGC Output Power Level
• Band Selectable via Software
• Can Support Non-Contiguous Bands
• Supports Embedded Wireless Modem
• Supports Network Management Monitoring System via SNMP
1.1.2 Available Models
Epoch-HP is available in all 1900 MHz PCS band combinations. The
following table illustrates the six models which are available in the
Epoch-HP series:
Product ID Description
Epoch-HP-05-SX
5 W composite output power with 95 dB of gain (30
dB dynamic AGC range).
Band Option 1 (S1): Any 5 or 15 MHz block or any 5
MHz and 15 MHz contiguous blocks at anytime.
Band Option 2 (S2): Any 5 or 10 MHz block or any 5
MHz and 15 MHz contiguous blocks at anytime.
Band Option 3 (S3): Any 5 or 5 MHz block or any 5
MHz and 15 MHz contiguous blocks at anytime.
Epoch-HP-10-SX 10 W composite output power with 95 dB of gain