User Manual

Epoch-HP RF Repeater
User Manual V1.1
Advanced RF Technologies, Inc. Proprietary Document Page 26 of 36
3.1.5.2 Firmware Upgrade
The Firmware Upgrade Window enables you to upgrade the firmware of the
repeater. The latest version of the firmware will be provided to you by ADRF.
Save the latest version of the firmware on your PC. Click on Open and locate
the firmware from your PC. Click on Download and automatically the latest
version of the firmware will be downloaded onto the repeater.
3.2 Using the Epoch-H V1.X
3.2.1 Changing Parameters
In changing the parameters of the repeater via use of the Epoch-H V1.X,
note that the values entered into the Epoch-H V1.X are limited to the
ranges and modes specified in the Menu Structure section as explained in
Section 3.1 on page 15.
The Organizational Chart below shows (alphabetically) the parameters
that can be changed and the location of each parameter in the Menu
Structure. The asterisk “*” denotes parameters that apply to both uplink
and downlink.
Figure 14 – Firmware Upgrade Window of the Epoch-H V1.X