Manualshelf

User Manual

ManualsBrandsAdvanced RF Technologies ManualsElectronicsDuo-i6515NM, Duo-i6525NM, and Duo-i8030NM repeaters with digital filtering (800/900 MHz band)
21222324252627282930
Duo-i6515/6525/8030NM
User Manual V1.6
Advanced RF Technologies, Inc. Proprietary Document Page 25 of 40
3.4 Repeater Install
If you click on the Install tab, the following window will appear:
Band Selection
Simply click on the desired operating bandwidth.
SNMP
Type in the assigned Site/Cascade ID and Manager IP Address.
Default Site ID is ADRF.
Default Manager IP address 100.10.10.100
Repeater
Click the
Install button to automatically setup the repeater.
It may take up to 3 minutes to complete the process. You will see a gradual
progress bar display. After the process is completed, a pop-up window will
display “Installation Successfully Completed” messa
ge.
C
lick on
Status tab, the Installation box now changes from “Not Installed” to
“Installed.”
If the Duo-i6515/6525/8030NM detects a problem during the installation process,
it will show a prompt message, e.g., “Low RSSI.” Please follow the instructions
and address the problem to finish the installation process.
If the problem persists, please contact our technical support.