User Manual

Delos200 RF Repeater
User Manual V1.1
Advanced RF Technologies, Inc. Proprietary Document Page 20 of 30
2.1.4.2 Upgrade Window
In order to download the latest repeater firmware, click on the Upgrade
Window. The firmware file will be provided by the technical support group
from Advanced RF Technologies, Inc. Once the firmware file has been saved
on the PC, you would connect the Delos200 repeater to the PC via the USB
cable provided. Click on “Open” and locate the firmware file and click on
‘Download.”
Once the firmware has been downloaded successfully, the following pop-up
window will appear.
2.2 Default Control Settings
Control Item Setting Value
AGC Mode ON
Downlink/Uplink HPA Mode
ON
Uplink Tracking Mode ON
Downlink/Uplink Gain 70 dB
Downlink/Uplink AGC Level 23 dBm
** When
AGC ON mode is enabled, by default, the Downlink/Uplink AGC
Level is set to 23 dBm.
Table 3 - Default Repeater Settings
Figure 8 - Upgrade Window of the Delos200 Software