User Manual

Delos200 RF Repeater
User Manual V1.1
Advanced RF Technologies, Inc. Proprietary Document Page 16 of 30
2.1.2 Status Menu
The Status Window is the monitoring window of the Delos200 Software.
This window enables the user to monitor the status and settings of the
Delos200. In other words, no parameters can be changed in the Status
Window. To change parameters, you will need to go to the Control
Window.
Bands
Currently selected
band(s) are highlighted.
Repeater Input
Indicates input
signal strength of
the repeater after
the donor antenna
[in dBm].
Repeater Output
The output of the
repeater [in dBm]
before being radiated
by the server antenna.
Repeater Gain
Indicates the gain
of the repeater
[in dB].
Status Bar
Displays the status of the repeater (e.g. Status
Window Loaded Properly, etc.), transmit (TX)
and receive (RX) communication LEDs.
Figure 5 - Status Window of the Delos200 Software
Bandwidth
Indicates the bandwidth of
the selected filter.
Downlink/Uplink
Indicates currently
selected operating
frequencies.
Alarm
Indicates what type of
alarm the repeater
currently is in.
Temp. & Current
Indicates what the
temperature is inside the
repeater and how much
current is being drawn.