User's Manual
Table Of Contents
- 1. Introduction
- 2. Overview
- 3. Alarms
- 4. Installation
- 5. AXM2100-9543-ICS Web-GUI Setup
- 6. Maintenance Guide for AXM2100-9543-ICS Repeater
- 7. Warranty and Repair Policy
- 8. Specifications
- 9. mechanical drawing
- 10. Appendix
5.5.4 System: Update
• To perform a firmware update, click on the System tab and the following screen will appear.
Figure 5-33 System – Update
• Click on the Choose File… button and locate the firmware file
• Click on the Upload button to perform the firmware update
• Once the firmware update is complete, the following popup message will appear:
Figure 5-34 Pop-up message after System update is complete
5.5.5 System- Backup
The backup section allows the user to save the settings of the module. To perform the backup, click on the
Backup button and you will be prompted to save the backup file. To restore the settings to the system, perform an
update using this file.
Figure 5-35 System Backup
5.6 Help
If an internet connection is available, clicking on the Help Tab will redirect the user to our Technical Support
page.
Advanced RF Technologies, Inc. 39