User's Manual
Table Of Contents
- 1. Introduction
- 2. Overview
- 3. Alarms
- 4. Installation
- 5. AXM2100-9543-ICS Web-GUI Setup
- 6. Maintenance Guide for AXM2100-9543-ICS Repeater
- 7. Warranty and Repair Policy
- 8. Specifications
- 9. mechanical drawing
- 10. Appendix
1. INTRODUCTION
The AXM2100-9543-ICS is an over-the-air high power repeater.
1.1 Highlights
• Active ICS (Interference Cancellation System)
• Band Selectable
• Digital filtering with sharp roll-off (>50dBc @ ± 1 MHz from sub-band edge)
• Remote monitoring and control capability using our Web-based GUI
• 95 dB of max gain and 43/30dBm (DL/UL) Composite power
• LED panel provide signal strength and alarm status
• Support optional internal modem box for remote access and alarming
• Configurable network setting in order to interface with 3rd party external modem boxes
• Adjustable AGC Output Power Level
• Supports Network Management Monitoring System via SNMP
• Incremental Automatic Shutdown/Resumption Time: AXM2100-9543-ICS gradually increases the time span
between automatic shutdown and resumption before it permanently shuts itself down
• Versatility and Usability: AXM2100-9543-ICS gives total control to the user. Most of the control parameters,
e.g., gain, output power, alarm threshold, etc. can be changed using the Web-GUI so that the user can adjust
the system perfectly to the given RF environment
• Web-GUI connectivity via DHCP
• Supports DHCP; No 3
rd
party GUI software required
• Automated installation
• Direct ray cover on heat-sink to prevent direct light (Front door)
• Membrane vent to prevent moisture by condensation
Advanced RF Technologies, Inc. 10