User's Manual

7
.6 Return Material Authorization (RMA)
No product may be returned directly to Advanced RF Technologies, Inc. without first getting an approval from
Advanced RF Technologies, Inc. If it is determined that the product may be defective, you will be given an RMA
number and instructions in how to return the product. An unauthorized return, i.e., one for which an RMA number
has not been issued, will be returned to you at your expense. Authorized returns are to be shipped to the address
on the RMA in an approved shipping container. You will be given our courier information. It is suggested that the
original box and packaging materials should be kept if an occasion arises where a defective product needs to be
shipped back to Advanced RF Technologies, Inc. To request an RMA, please call [phone] or send an email to
[e-mail].
8. S
PECIFICATIONS
8.1 Electrical Specifications
Table 8-1 Electrical Specifications
Parameters Specifications Comments
Frequency
DL 1930~1995 MHz
UL 1850~1915 MHz
Frequency Error 0.1ppm
Band Selection
4.5/9/13.5MHz (Occupied bandwidth)
4.0/9.0/14.0/19MHz (Occupied bandwidth)
3.75/8.75 (Occupied bandwidth)
Gain Flatness
Full Band ±1.5dB
Each Band ±1.5dB
Gain
Maximum 95dB
Step 0.5dB
Range 40dB
Tolerance ±1dB
Spurious Emissions Meet FCC Rule
Out Band Spurious Emissions
-13dBm/1kHz; 9KHz<f<150KHz
-13dBm/10kHz; 150KHz<f<30MHz
-13dBm/100kHz; 30MHz<f<1GHz
-13dBm/1MHz; 1GHz<f<12.75GHz
Composite Output Power
(DL/UL)
+43dBm/+30dBm
EVM < 8%
Roll Offs > 50dBc@ 1MHz Outside pass-band
Noise Figure(Uplink) 5dB@ Maximum Gain
Delay 8us
Advanced RF Technologies, Inc. 39